An automatic RV stabilizer jack system can make setup faster, reduce trailer shake, and take some of the hassle out of arriving at camp.
Below, we focus on practical buying factors so you can choose a system that fits your RV, your usage, and your budget.
Best 10 Automatic Rv Stabilizer Jack System Picks for 2026
High-Speed Automatic Stabilizer
- Automatic adjustment with switch-based operation
- Independent legs handle uneven terrain
- Heavy-gauge powder-coated steel construction
Best For: RV and trailer owners who want fast, automatic stabilization with a no-switch setup.
Powered C-Jack Upgrade
BAL 21100005 Electric Stabilizer
- 12V powered stabilizing at the touch of a button
- Bolt-on design for scissor jack setups
- Weather-resistant steel construction
Best For: Trailer owners looking to power up an existing scissor jack with a simple bolt-on solution.
OEM Replacement Rear Stabilizer
- Electric switch eliminates hand cranking
- Independent legs help on uneven terrain
- Heavy-duty steel with safety protection
Best For: Owners replacing a 298707 rear stabilizer who want an electric, no-crank setup.
Heavy-Duty 4,000-Lb Stabilizer
SEAFLO Waterproof Dual Motor Jack
- 4,000 lb static load capacity
- IP67 motor and IP66 switches for weather resistance
- Dual motors adjust each leg independently
Best For: RV, trailer, and camper owners who need a high-capacity stabilizer with waterproof components.
Replacement Rear Power Stabilizer
Lippert 298707 Electric Stabilizer Jack
- Electric-powered rear stabilizer for quick campsite setup
- Includes waterproof switch kit for easier control
- 2,000 lb capacity with matched pump and motor
Best For: Replacing a Lippert 298707 stabilizer with a powered, weather-resistant option
Full 5-Point Leveling System
- Levels and stabilizes in under three minutes
- Hall Effect tech and touchpad controller for precise control
- Bolt-on install with heavy gauge steel construction
Best For: Travel trailers up to 10,000 lb GVWR needing a full electric leveling system
Direct Fit Stabilizer Replacement
- Push-button electric replacement for manual cranking
- Independent legs help on uneven terrain
- Heavy-duty steel build with braking safety features
Best For: Direct 298707 replacement for RV owners who want simple powered stabilization
Automatic hitch convenience
Lippert Smart Jack One-Touch Power Trailer Jack
- Auto-hitch memory for repeat height setup
- Halo LEDs and backlit controls for night use
- 3,500 lb. lift capacity with steel construction
Best For: RV owners who want a powered tongue jack with memory and lighting
Automatic sway control
Lippert PSX1 High-Speed RV Power Stabilizer
- Independent legs auto-adjust on uneven terrain
- Switch operation replaces manual cranking
- Integrated breaker protects against overload
Best For: Campers needing a powered stabilizer for uneven sites
Fastest powered setup
Lippert PSX2 High-Speed RV Power Stabilizer
- Dual motors for quick push-button stabilization
- Independent legs adapt to uneven terrain
- Heavy-duty steel frame with circuit protection
Best For: RV owners who want the fastest powered stabilizer in this group
High-Speed Automatic Stabilizer – Lippert PSX1 No-Switch
If you want an automatic rv stabilizer jack system that cuts setup time, the Lippert PSX1 focuses on simple push-button operation and independent leg movement. It is built for trailer-specific fitment, uneven terrain, and users who want a no-crank solution with a heavy-gauge steel frame.
Best For: RV and trailer owners who want fast, automatic stabilization with a no-switch setup.
Pros:
- No manual cranking required; uses a switch-based power system.
- Each leg operates independently to adapt to uneven ground.
- Heavy-gauge steel frame with embossed legs and powder-coat finish.
- Integrated breaker technology helps protect against overload while lifting.
Cons:
- Designed for a vehicle-specific trailer fit, so compatibility matters.
- No-switch style may not suit buyers who prefer a built-in control switch.
Overall, the PSX1 is a straightforward powered stabilizer for campers who value speed, rugged construction, and automatic adjustment over manual convenience features.
Powered C-Jack Upgrade – BAL 21100005 Electric Stabilizer
The BAL 21100005 is a compact option for adding powered stabilization to a scissor jack setup in an automatic rv stabilizer jack system. It runs on 12V power and delivers nearly automatic stabilizing at the touch of a button, making it a practical upgrade when you want easier campsite setup.
Best For: Trailer owners looking to power up an existing scissor jack with a simple bolt-on solution.
Pros:
- 12V motor provides powered stabilizing at the touch of a button.
- Bolt-on mount makes it suited to retrofit-style installation.
- Lightweight design keeps the add-on relatively easy to handle.
- Weather-resistant steel construction supports outdoor use.
Cons:
- Scissor jack is sold separately, so this is not a complete jack system.
- Replacement-style use means it is meant for specific setups rather than all trailers.
This is best viewed as a powered conversion piece rather than a full jack assembly, which makes it useful if you already have the right base hardware and want simpler operation.
OEM Replacement Rear Stabilizer – 298707 Switch Kit
MFZDQL Rear Trailer Power Stabilizer Jack Stand Kit with Black Exterior Switch Replaces 298707
Check Price On AmazonThis rear-mounted automatic rv stabilizer jack system is aimed at buyers replacing part number 298707 with a powered solution. It uses an electric switch, independent legs, and a heavy-duty steel build to simplify leveling on uneven ground while keeping installation focused on a universal-style fit.
Best For: Owners replacing a 298707 rear stabilizer who want an electric, no-crank setup.
Pros:
- Electric switch operation eliminates hand cranking.
- Each leg operates independently for uneven terrain.
- Heavy-duty steel construction with black powder-coated finish.
- Includes emergency short-circuit protection and overload-related safety features.
Cons:
- Built specifically as a 298707 replacement, so it is not a universal fit for every RV.
- Large, 58 lb assembly may be more involved to handle during installation.
If you need a replacement rather than a brand-new design, this kit focuses on familiar OEM-style function, powered convenience, and strong stability on rough or sloped sites.
Heavy-Duty 4,000-Lb Stabilizer – SEAFLO Waterproof Dual Motor Jack
The SEAFLO model is a robust automatic rv stabilizer jack system built for buyers who want strong load capacity, waterproof electronics, and easy one-touch leveling. With dual motors, independent leg control, and a 4,000 lb static load rating, it is designed for secure stabilization on uneven campsites and in harsh weather.
Best For: RV, trailer, and camper owners who need a high-capacity stabilizer with waterproof components.
Pros:
- 4,000 lb static load capacity for heavy trailers and campers.
- Dual motors control each leg independently for precise adjustment.
- IP67 motor and IP66 switches/reset breakers for wet-weather use.
- Powder-coated steel construction resists corrosion and daily wear.
Cons:
- Heavier assembly at 20.62 kg may be less convenient to install or remove.
- Maximum lifting height is 25 inches, which is lower than some 30-inch options.
For shoppers prioritizing durability, weather resistance, and load support, this SEAFLO kit stands out as a well-rounded powered stabilizer with a complete installation package.
Replacement Rear Power Stabilizer – Lippert 298707 Electric Stabilizer Jack
If you need an automatic rv stabilizer jack system replacement for a Lippert 298707 setup, this electric rear trailer stabilizer is built for quick, powered leveling and reduced campsite rocking. It uses a matched pump and motor for smooth start-up, includes a black waterproof switch kit, and is intended to make stabilization faster and easier than manual cranking.
Best For: RV and trailer owners replacing a Lippert 298707 stabilizer who want a powered, high-speed solution with weather-resistant switching.
Pros:
- Electric-powered operation for convenient raise/lower control
- High-speed design helps speed up setup and takedown
- Includes a black waterproof switch kit for moisture protection
- 2,000 lb capacity with 100% testing before shipment
Cons:
- Designed as a replacement part, so compatibility matters
- Heavier unit at about 58 lb
- Single stabilizer jack kit rather than a full leveling system
This is a practical pick if you want a direct replacement that focuses on powered stabilization, reliable switching, and straightforward trailer support. Its strengths are speed, capacity, and fit for 298707-style applications.
Full 5-Point Leveling System – Ground Control TT 672136
For buyers looking for an automatic rv stabilizer jack system that also levels the trailer, the Ground Control TT 5-point setup is aimed at fast, hands-off campsite prep. It uses Hall Effect technology for more precise leveling, comes with a touchpad controller, and is designed for travel trailers up to 10,000 lb GVWR.
Best For: Travel trailer owners who want an electric leveling and stabilization system with touchpad control and bolt-on installation.
Pros:
- Levels and stabilizes in under three minutes
- Hall Effect technology supports more precise leveling
- Touchpad controller can be wall-mounted for easy operation
- Heavy gauge steel build with powder-coat finish
Cons:
- Higher-cost, heavier system than a basic stabilizer jack
- Built for trailers up to 10,000 lb GVWR only
- Installation package is more involved than a simple replacement jack
This is the most complete option in the group if you want both leveling and stabilization in one electric system. Its bolt-on hardware, accurate control, and fast setup make it well suited to frequent travelers who value convenience.
Direct Fit Stabilizer Replacement – 298707 Electric RV Jack Stand
If you want an automatic rv stabilizer jack system replacement that keeps things simple, this electric jack stand is made to replace manual cranking with push-button operation. It fits 298707 applications, offers a 30-inch maximum lift height, and is built from heavy-duty steel with a black powder-coated finish for durable campsite support.
Best For: RV owners needing a direct 298707 replacement with independent leg operation and added safety features.
Pros:
- Press-button electric operation replaces manual cranking
- Independent legs adapt to uneven terrain automatically
- Heavy-duty steel build with black powder-coated exterior
- Includes braking system and emergency short-circuit protection
Cons:
- Only a single jack stand kit, not a full multi-point system
- Compatibility is focused on 298707 replacement use
- Lift height tops out at 30 inches
This is a sensible choice if you mainly want a reliable powered replacement with simple operation and safety-focused extras. It prioritizes fit, durability, and easier setup over advanced leveling features.
Automatic hitch convenience – Lippert Smart Jack One-Touch Power Trailer Jack
If you want an automatic rv stabilizer jack system style upgrade for hitching and leveling convenience, the Lippert Smart Jack focuses on fast, one-touch operation. It combines auto-hitch memory, a retract/extend function, and integrated LED lighting to make setup easier in low light, while the 3,500 lb. lift rating and large footplate add practical support.
Best For: RV owners who want a powered A-frame jack with memory, lighting, and simple one-button operation.
Pros:
- Auto-hitch memory helps it return to the original hitch height with the push of a button
- Halo LED lights and backlit controls improve night-time use
- 3,500 lb. lift capacity with a 12V motor for powered lifting
- Extra-large footplate and steel construction add stability
Cons:
- Designed as an electric A-frame tongue jack, not a full trailer stabilization system
- Requires 12V power and draws 30 amps during operation
This is a strong pick if your priority is effortless hitching with helpful lighting and memory features. It is built for convenience and everyday use more than multi-leg campsite stabilization.
Automatic sway control – Lippert PSX1 High-Speed RV Power Stabilizer
The Lippert PSX1 is a practical automatic rv stabilizer jack system option if you want to reduce sway without manual cranking. Its independent legs automatically adjust to uneven terrain, and the front-to-rear install option lets you place it where your trailer or 5th wheel needs the most support.
Best For: Campers who want a powered stabilizer that auto-adjusts on rough or uneven sites.
Pros:
- Automatic adjustment helps each leg respond independently to uneven terrain
- Switch operation eliminates manual cranking
- Heavy-gauge steel construction with embossed legs and powder-coated finish
- Integrated breaker technology adds overload protection
Cons:
- Uses a single switch kit rather than a more advanced dual-motor setup
- Rated for stabilization use, not as a lifting jack for hitching
The PSX1 is a solid fit if your main goal is reducing side-to-side movement and getting a more secure setup quickly. It emphasizes rugged construction and automatic terrain compensation over extra-frills operation.
Fastest powered setup – Lippert PSX2 High-Speed RV Power Stabilizer
The Lippert PSX2 is built for quick, push-button stabilization when you want an automatic rv stabilizer jack system that works fast at camp. Dual electric motors and independent leg adjustment help it adapt to rough ground, while the heavy-gauge steel frame and IP66-rated switch are made for regular outdoor use.
Best For: RV and 5th wheel owners who want faster powered stabilization with dual motors.
Pros:
- Dual electric motors provide fast push-button stabilization
- Independent legs automatically adjust to uneven terrain
- Heavy-gauge steel frame with embossed legs and powder-coated finish
- Built-in breaker technology helps protect the RV during overloads
Cons:
- Focused on stabilization rather than hitch lifting or leveling duties
- Front-to-rear installation flexibility may require more planning during setup
If speed matters and you want a more robust powered stabilizer, the PSX2 is the more aggressive option in this group. It pairs automatic adjustment with dual motors for a simpler, faster campsite routine.
How We Picked the Best Automatic Rv Stabilizer Jack System
We prioritized systems built for real-world RV use: dependable 12V operation, sturdy steel construction, weather resistance, and straightforward installation or replacement fitment. We also considered lift range, load handling, switch style, and whether the system is aimed at a specific trailer layout or a broader range of rigs.
Quick Comparison
Some options are simple rear stabilizer replacements, while others are more advanced automatic leveling or one-touch tongue jack solutions. That means the best choice is not always the most feature-rich model; it is the one that matches your setup. If you only need to tame rear bounce, a stabilizer-focused unit may be enough. If you want broader campsite leveling help, a multi-point system is worth a closer look.
Key Buying Factors for an Automatic Rv Stabilizer Jack System
Compatibility and Mounting
Confirm whether the jack is a direct replacement, a bolt-on upgrade, or part of a larger leveling system. Pay close attention to frame fit, switch placement, and whether the product is meant for travel trailers, fifth wheels, or A-frame tongues.
Lift Height and Load Capacity
Choose a model with enough travel to reach your typical stance and enough capacity for the weight it supports. More lift is useful on uneven sites, but only if the jack is designed to handle the load safely.
Weather Protection
Because these systems live outdoors, look for powder-coated steel, sealed motors, and protected switches or waterproof housings. Better corrosion resistance usually means fewer headaches over time.
Control Style and Convenience
Simple switch-operated units are easy to live with, while automatic or touchpad systems can save time during repeated setup. If you camp often, convenience features can matter as much as raw power.
Who Should Buy Which Automatic Rv Stabilizer Jack System?
Choose a basic stabilizer jack if your main goal is reducing movement at the rear of the trailer. Pick a one-touch tongue jack if you want easier hitching and front-end control. Go with a full Automatic Rv Stabilizer Jack System or multi-point leveling setup if you frequently travel, camp on uneven ground, or want the quickest possible setup routine. For frequent users, paying more for better durability and weather sealing is usually the smartest long-term value.