Choosing the right rear stabilizer jacks for motorhomes can make parking feel steadier, reduce unwanted movement, and improve overall comfort at camp.
Below, we break down the best options for different setups, from electric systems to manual heavy-duty jack sets, so you can match the right style to your coach and budget.
Best 10 Rear Stabilizer Jacks for Motorhomes Picks for 2026
Heavy-Duty 4-Pack
- 9,000 lb capacity with thick 11-gauge steel
- Includes 4 jacks, sockets, and install hardware
- Made for stabilizing and leveling only
Best For: Heavy trailers and motorhomes needing strong, complete stabilization
Power Stabilizer System
- Powered system eliminates manual cranking
- Automatic adjustment for uneven terrain
- Heavy-gauge steel with breaker protection
Best For: Buyers who want a full powered stabilizer upgrade
Balanced 4-Pack
ROCKMAN 24" Stabilizer Jack Set
- Wide bow-tie base for better ground contact
- Includes socket and bubble level accessories
- 5,000 lb capacity per jack for stabilization
Best For: Owners wanting an accessible, well-equipped jack set
Power Upgrade
Rear Trailer Power Stabilizer Jack Stand Kit
- Electric switch replaces hand cranking
- 2000 lb capacity with independent legs
- Steel build with powder-coated finish
Best For: Replacing a 298707-style rear power stabilizer jack on a motorhome
Heavy-Duty Pair
Kohree 6500lbs RV Stabilizer Jacks 2 Pack
- 6500 lb capacity scissor jack pair
- Includes crank handle and drill socket
- 24-inch max height with wide bow-tie base
Best For: Manual heavy-duty leveling and stabilization on RVs and motorhomes
Waterproof Control
Rear Trailer Power Stabilizer Jack System
- Electric-powered high-speed stabilizer system
- Black waterproof switch kit included
- 2000 lb capacity with matched pump and motor
Best For: Fast electric stabilization with waterproof switch control
Heavy-Duty Manual Choice
Kohree 7500lbs 24" Scissor Jacks
- 7500 lb capacity with alloy steel construction
- 24" max height and 4" retracted height
- Includes crank handle and drill bit
Best For: manual stabilization and leveling support
Electric Replacement Pick
Power Stabilizer Jack Stand Kit 298707
- Electric replacement for part 298707
- 30" lift height with independent legs
- Steel build with powder-coated finish
Best For: replacing a specific manual stabilizer with electric convenience
Full 4-Pack Value
OULEME 24" RV Camper Scissor Jacks
- Set of four jacks for full coverage
- 6500 lb capacity with extra-wide base
- Includes crank handle, drill socket, and screws
Best For: a complete four-corner stabilizing setup
Direct-Fit Replacement Motor – OEM RV Rear Stabilizer Jack Motor
If your rear stabilizer jacks for motorhomes stop responding, this replacement motor is built to get a Lippert power stabilizer back in service without changing the whole assembly. It’s made to OE specs, connects to the original harness, and is aimed at direct replacement of compatible rear landing gear leg motors.
Best For: Owners of compatible Lippert rear power stabilizer jacks who want a direct-fit motor replacement.
Pros:
- Direct-fit OEM-style design for easier installation
- Compatible with multiple Lippert part numbers and jack models
- Weatherproof, waterproof, and built for longer service life
- Claims a quick replacement process with original-size fitment
Cons:
- Only useful if your existing jack system matches the listed Lippert compatibility
- Replaces the motor, not the entire stabilizer jack assembly
For a motor-only fix, this is a practical option that focuses on fit and compatibility. If the rest of the stabilizer assembly is still in good shape, replacing the motor can restore function with less hassle than a full system swap.
Heavy-Duty 4-Pack – LIBRA 9K lb Scissor Jack Set
For buyers comparing rear stabilizer jacks for motorhomes, this 4-pack is a heavy-duty scissor-jack set meant for stabilizing and leveling rather than lifting. It uses thick 11-gauge steel, includes drill-ready sockets and installation hardware, and is built for larger RVs, trailers, and campers that need strong support.
Best For: RV owners who want a high-capacity scissor jack set with installation hardware included.
Pros:
- True heavy-duty 9,000 lb capacity
- Includes 4 jacks plus power-drill socket and install hardware
- Adjustable 24-inch extended height for versatile fit
- Thick steel construction with electrophoresis coating
Cons:
- For stabilizing and leveling only, not lifting or tire changes
- Bulkier than simpler jack options
This set makes sense when strength and a complete install package matter most. If you want a robust stabilization setup and plan to install multiple points at once, it offers a straightforward, durable solution.
Power Stabilizer System – Lippert PSX1 No-Switch Jack
If you want rear stabilizer jacks for motorhomes that remove manual cranking, the Lippert PSX1 is a powered stabilizer system with automatic adjustment. It uses independent legs to handle uneven terrain, and its integrated breaker technology adds protection during extension and retraction.
Best For: Owners wanting a full power stabilizer system with automatic adjustment and no-switch operation.
Pros:
- Powered operation eliminates manual cranking
- Automatic adjustment helps on uneven terrain
- Heavy-gauge steel and powder-coated frame for durability
- Integrated breaker technology for overload protection
Cons:
- Designed as a full stabilizer system, not a simple add-on
- Vehicle-specific fit limits compatibility
This is the most advanced option in the group if you want convenience and automatic leveling behavior from a power unit. It suits buyers replacing or upgrading to a complete powered stabilizer setup rather than a basic scissor jack.
Balanced 4-Pack – ROCKMAN 24" Stabilizer Jack Set
This scissor-jack set is a practical pick for rear stabilizer jacks for motorhomes when you want a straightforward 4-pack with useful accessories. It combines heavy-duty steel construction, a wide bow-tie base for better ground contact, and a 5,000 lb per-jack rating for stabilizing and leveling.
Best For: RV and motorhome owners who want a stable, easy-to-use 4-pack with a wide base.
Pros:
- Wide bow-tie base improves contact on soft or uneven ground
- Includes 4 jacks, magnetic hex socket, and bubble level
- 5,000 lb load capacity per jack
- Adjustable 24-inch extended height for common RV setups
Cons:
- Not intended for lifting or weight-bearing use beyond stabilization
- Lower capacity than the heavy-duty 9,000 lb option
For buyers who want a balanced mix of stability, accessories, and simpler hardware, this set is easy to evaluate. It’s a solid middle-ground choice when you need a dependable jack kit without stepping up to the highest-capacity model.
Power Upgrade – Rear Trailer Power Stabilizer Jack Stand Kit
MFZDQL Rear Trailer Power Stabilizer Jack Stand Kit with Black Exterior Switch Replaces 298707
Check Price On AmazonIf you want rear stabilizer jacks for motorhomes that trade hand-cranking for push-button convenience, this electric replacement kit is built for that job. It’s designed as a Lippert 298707 replacement, with a 2000 lb capacity, independent leg operation, and a black powder-coated steel build for stable setup on uneven ground.
Best For: Motorhome owners replacing a 298707-style rear power stabilizer jack who want electric operation and a high-capacity steel build.
Pros:
- Electric switch operation removes the need for manual cranking
- 2000 lb capacity with independent legs that adapt on uneven terrain
- Heavy-duty steel construction with black powder-coated exterior finish
- Includes an emergency short-circuit braking protection feature
Cons:
- Replacement fit means it’s aimed at 298707-compatible applications
- Large unit at 58 lbs and 79 inches long
- Single jack stand included, not a multi-pack
Overall, this is a practical choice if your priority is replacing an existing electric rear stabilizer with a like-for-like unit. It focuses on convenience, stability, and OEM-style compatibility rather than manual versatility.
Heavy-Duty Pair – Kohree 6500lbs RV Stabilizer Jacks 2 Pack
For buyers comparing rear stabilizer jacks for motorhomes, this Kohree 2-pack leans toward strength and flexibility rather than electric convenience. Each scissor jack is built from heavy-duty steel, supports up to 6500 lbs, and offers 24 inches of maximum lift, making it a solid pick for leveling and stabilizing trailers, RVs, campers, motorhomes, and pop-ups.
Best For: RV and motorhome owners who want a manual heavy-duty stabilizer jack pair with a high load rating.
Pros:
- 6500 lb load capacity for strong stabilization support
- 2-pack includes crank handle and drill socket
- 24-inch max height with 4-inch retracted height
- Wide bow-tie base designed for RVs, campers, motorhomes, and pop-ups
Cons:
- Power drill is not included
- Manual setup is less convenient than electric stabilizers
- Best suited to users comfortable with scissor-jack operation
This set makes sense if you want a dependable, no-frills stabilizer solution and don’t need powered operation. The included crank and drill socket add flexibility, while the steel construction keeps the focus on strength.
Waterproof Control – Rear Trailer Power Stabilizer Jack System
If you’re shopping for rear stabilizer jacks for motorhomes and want quick electric setup, this Lippert 298707 replacement kit is built around powered operation and a waterproof switch. It’s described as a high-speed stabilizer system with a 2000 lb capacity, matched pump and motor, and a black waterproof switch kit for easier control in wet conditions.
Best For: Motorhome or trailer owners who want a 298707-compatible electric stabilizer with waterproof switch control.
Pros:
- Electric-powered stabilizer system for quick operation
- Black waterproof switch kit helps protect control access in wet conditions
- High-speed setup and takedown reduces time and effort
- 2000 lb capacity with matched pump and motor
Cons:
- Replacement design limits it to compatible applications
- Single stabilizer unit, not a full multi-jack set
- Large component at 58 lbs and 79 inches long
This kit is a good fit if you value fast powered deployment and want a switch setup that’s built for more dependable operation in damp weather. It stays close to the OEM-style formula while adding a waterproof control detail.
Heavy-Duty Manual Choice – Kohree 7500lbs 24" Scissor Jacks
If you need rear stabilizer jacks for motorhomes or other RV setups, this Kohree 2-pack is a straightforward heavy-duty option. It uses alloy steel construction, a wide bow-tie base, and a 24-inch max height to help stabilize and level trailers, campers, RVs, and motorhomes on typical camp surfaces.
Best For: Owners who want a manual, heavy-duty scissor jack set for basic stabilization and leveling support.
Pros:
- 7500 lb capacity and heavy-duty steel build for strong support
- 24″ maximum height with 4″ retracted height for flexible setup
- Includes crank handle and drill bit for manual or faster drill use
- Wide bow-tie base helps improve stability
Cons:
- Only includes 2 jacks, so it may not suit users needing a full 4-corner set
- Drill is not included
Overall, this is a solid pick if you want a durable manual stabilizer that covers the basics well and comes ready with the main turning tools. It’s a practical fit for campers and motorhome owners who value simple, heavy-duty hardware.
Electric Replacement Pick – Power Stabilizer Jack Stand Kit 298707
If you’re looking for rear stabilizer jacks for motorhomes and want to replace a manual setup with electric convenience, this kit is built around the 298707 replacement part. It offers a 30-inch lift height, independent leg operation, and a steel build with a black powder-coated exterior for regular RV use.
Best For: RV owners replacing a specific manual stabilizer with an electric jack stand kit.
Pros:
- Electric operation eliminates manual cranking
- Independent legs can adapt to uneven terrain
- 30″ maximum lift height for added range
- Heavy-duty steel construction with powder-coated finish
Cons:
- Designed as a specific replacement for part number 298707
- Only one jack stand is included
- 2000 lb capacity is lower than many manual scissor-jack sets
This is the most specialized option in the group, so it makes sense when you need an electric replacement and compatibility with the listed OEM part matters. It’s less about general-purpose versatility and more about a direct-fit upgrade.
Full 4-Pack Value – OULEME 24" RV Camper Scissor Jacks
For rear stabilizer jacks for motorhomes or larger RV leveling setups, this 4-pack stands out because it covers all corners instead of just one end. With a 6500 lb capacity per jack, a 24-inch lift range, and an extra-wide base plate, it’s aimed at owners who want a complete stabilizing kit with mounting hardware included.
Best For: RV owners who want a full set of four stabilizer jacks for broader leveling coverage.
Pros:
- Set of four jacks provides full-vehicle coverage
- 6500 lb capacity and extra-wide base plate for stability
- 4″ to 24″ adjustment range suits different frame heights
- Includes crank handle, drill socket, screws, and manual
Cons:
- Bulkier kit than a 2-jack option
- Manual operation may be less convenient than electric systems
This is the strongest all-around value if you want a complete stabilizer package instead of piecing together individual parts. The included hardware and broad height range make it especially useful for owners setting up a full leveling system.
How We Picked the Best Rear Stabilizer Jacks for Motorhomes
We focused on Rear Stabilizer Jacks for Motorhomes that offer a practical mix of load capacity, ease of installation, compatibility with common Lippert-style setups, and everyday durability. We also looked for models that make setup faster, whether that means electric operation, a drill-ready design, or a straightforward manual crank.
Quick Comparison
In general, electric rear stabilizer systems are best for convenience and frequent use, while scissor jack sets tend to offer strong value and flexible support for owners who do not mind manual operation. Heavy-duty capacity is important, but so is the actual fit for your frame, mounting points, and available clearance.
Key Buying Factors for Rear Stabilizer Jacks for Motorhomes
Capacity and Stability
Choose a jack system rated well above your expected rear load. Higher capacity does not automatically mean better stability, but it can provide more confidence on uneven ground and reduce strain over time.
Fit and Compatibility
Check your motorhome’s frame dimensions, mounting pattern, and whether you need a replacement for a specific Lippert part number. Compatibility is especially important for powered units, where the wrong match can complicate installation.
Power Type
Electric stabilizers are ideal if you want fast, low-effort setup. Manual scissor jacks are usually less expensive and simpler to maintain, while drill-assisted designs offer a useful middle ground.
Lift Range and Clearance
Make sure the jack can reach your needed height without bottoming out or overextending. If your campsite terrain varies, a wider lift range can help you level and stabilize more easily.
Durability and Weather Resistance
Look for heavy-gauge steel, protective coatings, and corrosion-resistant hardware. Rear-mounted components face road spray and weather exposure, so build quality matters.
Who Should Buy Which Rear Stabilizer Jacks for Motorhomes?
If you want the fastest and most convenient solution, choose an electric stabilizer system. If you camp often and want strong support at a lower price, a heavy-duty manual scissor jack set is usually the best value. If you need a direct replacement, prioritize exact part-number compatibility before anything else.
For owners comparing Rear Stabilizer Jacks for Motorhomes, the best choice is usually the one that balances load rating, fit, and convenience for how you actually travel. A well-matched jack can make setup quicker and your campsite noticeably steadier.